Split Lappers

47.0255  Split Lapper -  $445.00
1/2 HP motor, 115 volts, 3450 RPM.  On/Off switch.  Heavy cast iron base.  Adjustable light. With 3" outlet for connection to a dust collector.  Spindle supplied.

47.0256  Split Lapper with Table  -  $795.00
24"W x  24"D x 33"H. Heavy gauge steel with formica laminated top.  On/Off switch mounted on front leg.

Dust Collectors

47.029  Dust Collector, 14 Filter Bags  -  $895.00
70 Lbs.  15"W x 14-3/4"D x 21"H.  Motor - 1/2 HP, 115V, 3450 RPM. Suction 1/4 HP - 400 CFM. 14 Filter Bags. Two 3" Flanges. External metal foot shaker for filter bags.

47.0301  Dust Collector, 24 Filter Bags  -  $2,450.00
240 Lbs.  22"W x 20"D x 38-1/4"H.  Motor - 3/4HP, 115V, 3450 RPM. Suction 1/4 HP - 600 CFM. 24 Filter Bags. Four 3" Flanges. Built-in Silencer. External metal foot shaker for filter bags.

47.035  Dust Collector with 1/2 HP motor  -  $595.00
47.031  Dust Collector only - $425.00
Unit measures 11"H x 33 1/2"W x 22"D.  Polishing units come with left and right spindles designed and built for years of service with heavy gauge sheet steel casing.  Double hemmed edges and durable, baked enamel finish.  Work area is illuminated by lights mounted under each side of hood.  Easy to remove and replace filters.

47.182  Fiberglass Filter, 12" x 32" x 2"  -  $13.95
*Lacy stocks filters for Handler and Grobet-ProCraft.

47.1050  Single Spindle Dust Collector  -  $425.00
3450 RPM with 1/3 HP motor.  Comes with one spindle.  Unit measures 13-1/4"W x 18"D x 10"H.  With suction motor and filter.

47.1051  Fiberglass Filter, 9-3/4" x 12-3/4" x 2"  -  $16.95

47.055  Double Spindle Polisher/Dust Collector  -  $495.00
With 1/3 HP motor.  Unit measures 20-1/2"W x 19-3/4"D x 12-1/2"H.  Comes with 5/8" tapered spindles, double work light, and on/off switch.  Replaceable fiberglass filter.

47.179  Fiberglass Filter,  20" x 12" x 2"  -  $16.95

Polishing Systems

47.034  Combination Polishing System  -  $3,495.00
Floor space measures 22"W x 20"D x 55"H.  This unit offers a Split Lapper combined with a 1/2 HP polishing motor and Dust Collector.  Split Lapper and Polishing Motor are mounted on a wooden table top covered with formica, rigidly placed on a One HP Dust Collector.  Offers itself to be the best polishing system available.  Polishing motor is also accompanied with a splash dish.  One HP Dust Collector has a 900 CFM intake.  Takes filter bags.

47.092  Polishing and Grinding Dust Collector, Standard Sit-Down Polisher  -  $2,495.00
A superior dust collector with cabinet and two hoods and a handy overhead shelf to hold polishing compounds and buffs.  Made of heavy gauge metal, with removable pans.  Shipped with filters ready for use, will give years of service.  Unit measures - 56"H x 24"D x 42"W.  Red Wing Polishing motor: 2 speed, 1/4 HP, 3450 RPM. Suction: 1/4 HP, 115 Volts, 600 CFM.  Takes two fiberglass filters 12" x 32" x 2".  Two Aluminum Shielded Hoods with lights and insert pans, overhead shelf, spindles supplied.

47.182  Fibreglass Replacement Filter, 12" x 32" x 2 "  -  $13.95

47.095  Polishing and Grinding Dust Collector, Heavy Duty Industrial Unit -  $3,295.00
This unit is powered by a ball bearing, capacitor start 3450 RPM suction motor.  Two 1/2 HP motors mounted on formica covered table top.  Two steel hoods, vented at bottom, finished in baked enamel.  Unit measures 56"H overall, work surface measures 40"H x 48"W x 28"D approximately.  Polishing Motors: Two 1/2 HP single shaft, 115 volts, 3450 RPM. Suction: 3/4 HP, 115 volts, 600 CFM.  Filter area takes 24 shakeable cloth bags containing 62 sq.ft. filtering area.  Two shielded hoods with overhead lights. Spindles supplied.

47.096  Set of 24 Replacement Bags  -  $ 510.00/set
47.0951  Dust Collector with table top only  - $2,695.00
47.0671  1/2 HP Motor only  -  $345.00

Motors

47.1141  Baldore Two Speed, 1/4 HP Motor, Low Base, Two Spindles -  $345.00
47.1142  Baldore Two Speed, 1/4 HP Motor, High Base, Two Spindles  -  $345.00
Low Base 4-1/2". High Base 6".  3450 RPM, 115 Volts.  Spindles supplied.

47.0531  One Speed, 1/3 HP Economy Motor, Two Spindles - $199.00
47.1151  One Speed, 1/2 HP Motor, Two Spindles  -  $395.00
3450 RPM, 115 Volts.  Spindles supplied.

Polishing Splash Hoods

47.300  Aluminum Polishing Splash Hood -  $75.00
With removable insert pans with light. Measures 12"H x 10"Wx 14"D. .

47.3001  Aluminum Polishing Splash Hood with Acrylic Shield -  $119.00
Everbrite Hood with a clear acrylic shield. With cut-out. .

47.301  Heavy Gauge Steel Polishing Splash Hood-  $129.00
Made of heavy gauge steel, baked enamel surface.  Inlet in bottom. With lights. Measures 11"W x 16"H x 15-1/4"D.

23.050  Sand Blaster -  $395.00
Made of heavy gauge steel.  Front hinged access door, with 5" circular window.  Filtered exhaust port.  Lever-controlled air valve.

23.051  Glass Beads for Sand Blaster  -  $25.95
Micro-sized glass beads, waterproofed. 5 lbs.

Tapered Spindles for Straight Shaft Motors
Steel spindles to fit straight motor shafts.  Made in U.S.A.
47.270  Tapered Spindle, 1/4", Right    $10.95
47.271  Tapered Spindle, 1/4", Left    $10.95
47.272  Tapered Spindle, 5/16", Right    $10.95
47.273  Tapered Spindle, 5/16", Left    $10.95
47.274  Tapered Spindle, 3/8", Right    $10.95
47.275  Tapered Spindle, 3/8", Left    $10.95
47.276  Tapered Spindle, 1/2", Right    $10.95
47.277  Tapered Spindle, 1/2", Left    $10.95
47.278  Tapered Spindle, 5/8", Right    $10.95
47.278  Tapered Spindle, 5/8", Left    $10.95

47.258  Tapered Chuck for Brushes, Right   $10.95
47.259  Tapered Chuck for Brushes, Left   $10.95
Brushes with 1/8" holes can be threaded onto the hardened steel taper, which in turn can be threaded onto a standard tapered spindle. A handy way to use small setting brushes on polishing motors. See Unmounted Wheel Bristle Brushes .

47.3031  Gold Saving Hood  -  $375.00
16"H x 16"W x 16"D.  Complete with lockable and removable lower drawer.  Clear acrylic frontal shield and inside fluorescent light.  For use with single spindle motor.  Finished in multi-gray with white interior for maximum polishing illumination.