All Prices are in Canadian Dollars
Currency Conversions	Shopping Cart Tips Terms of Sale

Ring Enlarger, Ring Sizer, and Ring Bender

P18500  Upright Ring Stretcher & Reducer     $309.95
This tool is used to enlarge or reduce wedding bands.  Features six-spline mandrel, 16 countersunk dies.  Reduces plain bands up to 12mm wide.

ORDER QUANTITY

P185500  Combination Ring Bender, Reducer, Stretcher     $399.95
Combines 3 important functions into 1.  Ring Bender, Ring Reducer and Ring Stretcher.  Features 6-spline mandrel, 16 countersunk dies.  Reduces plain bands up to 12mm wide.  Bends flat, oval and half round blanks up to 4mm thick.

ORDER QUANTITY

User Notes for Items P18500 and P185500:

• For best results the bands should be annealed
• The reduction or enlargement should always be done in small increments
• The ring should be turned over after each increment of reduction or enlargement
• Sizes marked on this machine are for reference only
• Do not use with stone set rings
• Check size frequently whe enlarging or reducing rings

P30100  Super Ring Bending Tool     $219.95
The new PepeTools strong, but versatile bending tool outperforms all other bending tools.  Brings the user great variety in the degree of bends needed to perform their task.  Consists of the following round centre core dies with matching outer dies in sizes 12, 14, 16, 20 & 22mm and additional 45 & 90 degree angle dies.  The eccentric base and handle performs at a high level of torque and strength, allowing the user to exert less strength in bending the metal.

ORDER QUANTITY

Miniature Anvils 

12.305  Miniature Horn Anvil, Size 5"L x 1-1/4"W x 1-3/4"H    $24.95
For flattening and shaping, with hole for riveting.

ORDER QUANTIT

12.301  Miniature Horn Anvil, Round Base, 3 7/8"L x 2 5/8"H   $61.95
For flattening and shaping, with hole for riveting.

ORDER QUANTITY

12.512  #12 Anvil Stake     $348.95
For Small conial and retangular work. Length 12", Flat top 1 1/4" wide at center. Arms taper to 3/8".

12.788  Stake Holder     $165.95
Holds most stakes. Measures 7 3/4" long x 4" wide, with holes in the base for permanent mounting.

Forming and raising stakes. Other styles are available.

Disc Cutter Sets
Made of high carbon tool steel, these cutters will produce perfect circles from soft metals up to a 12 gauge thickness.  Each disc cutter set is individually machined and tempered to perfection.
Disc Cutters are to be used with a pressing device, such as a hydraulic press.

P19410  Small Disc Cutter     $119.95
7 individual dis cutters measure 1/8", 3/16", 5/16", 3/8", 7/16", 1/2" in increments of 1/16".

ORDER QUANTITY

P19510  Large Disc Cutter     $149.95
5 individual dis cutters measure 1/2", 5/8", 3/4", 7/8", 1" in increments of 1/8".

ORDER QUANTITY

P19610  Combination Disc Cutter     $199.95
11 individual dis cutters measure sizes 1/8" to 1/2" in increments of 1/16" and sizes 1/2" to 1" in increments of 1/8".

ORDER QUANTITY

P19620  New Style Large Disc Cutter     $149.95
2 individual disc cutters measure 1 1/8" & 2".

ORDER QUANTITY

Wire and Tube Forming Tools

P30700  Pepe Jump Ring Maker     $249.95

P30900  Pepe Tube Cutter     $59.95
Allows for straight cuts on tubing used in jewellery repair or manufacturing. Tool is designed for measuring and cutting to the desired length. Tubing is cut with the standard jewellers saw frame and blade (not suppplied with unit).

P31000  Pepe Jewellers Miter Jig    $169.95
Precision manufactured tool for cutting, bending and scoring sheet and wire. Available angles: 45°, 60°, 90°, 135°, 120°. Made of high carbon tool steel. Nine grooves are designed to hold a wide range of wire and tubing.aine.

113596   Jewellers Miter Jig - Made in France   $279.95
Master quality precision manufactured tool for cutting, bending and scoring sheet, wire and tube. 

Dapping Punch and Block Sets

P228500  62 Piece Ambassador Dapping Set     $649.95
Collection includes: 30 piece set of dapping punches sizes 2.8mm to 50.8mm, 22 piece set of cutters 2.8mm to 22.2mm, 5 piece set of ID dapping punches. The ID punches are made one mm smaller than regular punches to allow for metal thickness. 1 each 2 x 2 dapping die, 1 each designers block, 1 each 2 1/2 x 2 1/2 dapping die, 1 each 27 depressions dapping die.

P25022  22 Piece Dapping Cutters Set     $139.95
22 individual cutters measure from 2.8mm to 22.2mm. These precision cutting punches provide you with fabrication and design versatility. Lightly hit the punch to create a surface texture in a variety of designs. The punch can also be used to cut soft metals up to 28ga. 

P162500  16 Piece Perfect Match Dap & Die Set with Designer Block    $179.95
1 Designer dapping block, 14 matching punches from 2.4mm to 24.6mm, 1 wood base.

P161500  24 Piece Perfect Match Dap & Die Set  with Flat Block    $199.95
1 Flat dapping block, 22 matching punches from 1.3mm to 24.6mm, 1 wood base.

P158500  19 Piece Perfect Match Dap & Die Set     $199.95
1 each 2" x 2" dapping block, 17 matching punches from 2.4mm to 34.2mm, 1 wood base.

P159500  23 Piece Perfect Match Dap & Die Set     $229.95
1 each 2 1/2" x 2 1/2" dapping block, 21 matching punches from 1.3mm to 50.1mm, 1 wood base.

P22805  5 Piece ID Dapping Punch Set     $119.95
5 Individual punches measure from 27.6mm to 49.8mm. ID stands for inside diameter. These perfectly matched punches are 1mm smaller than the cavity diameters in our dappping blocks. This was done in order to allow for the thickness of the metal being formed, so the punch diameter will match inside diameter of the dome being formed.

P22830  30 Piece Dapping Punch Set     $209.95
30 Individual punches measure from 2.8mm to 50.8mm. These high polish dapping punches are made from tool steel and hardened to 50 HRC on both hit and work ends. The unique tempering method leaves the shank of the punch at mill hardness, this allows the handle to absorb the shock and prevent crystallization of the metal. This hardening technique enhances the performance and life of the tool.

P15800  2" x  2" Dapping Cube     $89.95
17 half spheres on 50mm Sq. Daping Cube.

P15900  2 1/2" x  2 1/2" Dapping Cube     $129.95
21 half spheres on 65mm Sq. Daping Cube.

P16100  Flat Dapping Block     $99.95
27 half spheres. 1/8" - 1" half spheres.

P16200  Designer Dapping Block     $89.95
14 half spheres and 8 half cylinders. 1/8" - 1" half spheres and cylinders.

Flat Dapping Dies
Dapping equipment make it easy for you to form and dome sheet metal to any curvature your designs may require. Italian dapping dies and punches are made of hardened steel. Punches have a high polish so they will not mar your piece. Highest quality precision finished. Made in Italy.

78.327  Flat Dapping Die, Size 2mm to 20mm      $89.95
78.328  Dapping Punches for 78.327, Size 2mm to 20mm      $115.00
78.329  Wooden Stand for 78.327 and 78.328      $39.95

78.331  Flat Dapping Die, Size 2mm to 32mm      $155.00
78.332  Dapping Punches for 78.331, Size 2mm to 32mm      $225.00
78.333  Wooden Stand for 78.331 and 78.332      $39.95

Economy Dapping Dies
Made in India.
25.0671  Economy Dapping Dies, 2" Steel Cube     $29.95
25.0672  Economy Dapping Dies, 2" Brass Cube    $29.95

Bezel Blocks with Punch

#10   Square Bezel Block with Punch, 4mm to 14mm     $159.95
Produces perfect bezels and prong settings. Comes with an angled punch precisely machined to fit each bezel size in the set. Maximum thickness is 20 gauge metal. Made of hardened steel. High quality. Made in Italy. 

#10A   Square Emerald Bezel Block with Punch, 4mm to 14mm     $159.95
Produces perfect bezels and prong settings. Comes with an angled punch precisely machined to fit each bezel size in the set. Maximum thickness is 20 gauge metal. Made of hardened steel. High quality. Made in Italy. 

Produces perfect bezels and prong settings. Comes with an angled punch precisely machined to fit each bezel size in the set. Maximum thickness is 20 gauge metal. Made of hardened steel. High quality. Made in Italy. 

#C10  Rectangle Emerald Bezel Block with Punch, 6mm x 4mm to 15mm x 13mm    $159.95
Produces perfect bezels and prong settings. Comes with an angled punch precisely machined to fit each bezel size in the set. Maximum thickness is 20 gauge metal. Made of hardened steel. High quality. Made in Italy. 

78184  Pear Bezel Block with Punch, 5mm x 4mm to 14mm x 21mm    $149.95
Produces perfect bezels and prong settings. Comes with an angled punch precisely machined to fit each bezel size in the set. Maximum thickness is 20 gauge metal. Made of hardened steel. High quality. Made in Italy. 

#C36  Trillium Bezel Block with Punch, 5mm to 15mm     $335.95
Produces perfect bezels and prong settings. Comes with an angled punch precisely machined to fit each bezel size in the set. Maximum thickness is 20 gauge metal. Made of hardened steel. High quality. Made in Italy. 

#12  Triangle Bezel Block with Punch, 4mm to 14mm     $139.95
Produces perfect bezels and prong settings. Comes with an angled punch precisely machined to fit each bezel size in the set. Maximum thickness is 20 gauge metal. Made of hardened steel. High quality. Made in Italy. 

Necklace Forming Busts  

JAT43055  Necklace Forming Bust     $59.95
Made of polished cast iron. Use for shaping, forging or display. Hammer metal or work wax directly on mandrel.

Forming Blocks

P118500  Professional Forming Set  26 piece     $395.95
Set includes: 2" x 2" block with six grooved sides. 24 forming stakes and one wood holder.

P117500  Professional Forming Set  31 piece     $449.95
Set includes: 2 3/4" x 2 3/4" block with six grooved sides. 29 forming stakes and one wood holder.

P11700  Professional Forming Block      $85.95
 2 3/4 " x 2 3/4 " Six grooved sides offer a wide variety of unique grooves in many different sizes.

P11800  Professional Forming Block      $89.95
 2 " x 2 " Six grooved sides offer a wide variety of unique grooves in many different sizes.

P265500  Flat Anvil Set      $

 12 Stakes with cast-iron base and work holder are nestled in a wood base for convenient storage.

P265500A  Domed Anvil Set      $395.95
 12 Stakes with cast-iron base and work holder are nestled in a wood base for convenient storage. 

P19800  Steel Bench Block 2 1/2" x 2 1/2" x 3/4"    $12.95
Provides a solid base for work while flattening, straightening or designing. Precision ground smooth. Hardness 46-50 RC. Made of high quality tool steel.

Provides a solid base for work while flattening, straightening or designing. Precision ground smooth. Hardness 46-50 RC. Made of high quality tool steel.

Provides a solid base for work while flattening, straightening or designing. Precision ground smooth. Hardness 46-50 RC. Made of high quality tool steel.

Provides a solid base for work while flattening, straightening or designing. Precision ground smooth. Hardness 46-50 RC. Made of high quality tool steel.

Adjustable Sheet Ingot Molds

P14800  Adjustable Sheet Ingot Mold  4 x 42 x 66mm   $31.95

Recycle your scrap metal into ingot sheet for rolling and shaping. Adjust the size of the ingot by moving to the desired size and clamping the two horizontal plates with the screw on the handle.

P14810  Adjustable Sheet Ingot Mold  5 x 42 x 67mm   $44.95

Recycle your scrap metal into ingot sheet for rolling and shaping. Adjust the size of the ingot by moving to the desired size and clamping the two horizontal plates with the screw on the handle.

P14820  Adjustable Sheet Ingot Mold  4 x 42 x 96mm   $49.95

Recycle your scrap metal into ingot sheet for rolling and shaping. Adjust the size of the ingot by moving to the desired size and clamping the two horizontal plates with the screw on the handle.

P14900  Combo Sheet and Wire Ingot Mold 4 x 46 x 77mm Sheet / 4-5-6-7mm Wire   $49.95
Two ingot molds in one. These molds can be used to make wire ingots by placing the rounded sides together. Reverse the plates to make adjustable sheet ingots. Recycle your scrap metal.

Two ingot molds in one. These molds can be used to make wire ingots by placing the rounded sides together. Reverse the plates to make adjustable sheet ingots. Recycle your scrap metal.

P14920  Combo Sheet and Wire Ingot Mold  5 x 77 x 106mm Sheet / 4-5-6-7-8-10mm Wire   $69.95
Two ingot molds in one. These molds can be used to make wire ingots by placing the rounded sides together. Reverse the plates to make adjustable sheet ingots. Recycle your scrap metal.

P14930  Combo Sheet and Wire Ingot Mold  4 x 77 x 47mm Sheet / 4-5-6-7-8-10mm Wire   $62.95
Two ingot molds in one. These molds can be used to make wire ingots by placing the rounded sides together. Reverse the plates to make adjustable sheet ingots. Recycle your scrap metal.

P14850  Strip Ingot Mold 24mm Long, Grooves: 6,7,9mm x 5mm Depth   $39.95
Excellent ingot for pouring metal into a strip in preparation for rolling into wire. Machined from high quality tool steel, ground smooth. Allows for easy metal removal.

Pitch Bowls, Rubber Bases and Pitch

For repousse work and chasing. See Goldsmith's and Silversmith's Hammers.

5" Diameter

25.471  Deep Pitch Bowl Set 5" Diameter     $79.95
Can be tipped to an extreme angle. Complete set consists of pitch, bowl and rubber pads.

25.401  Replacement Pitch Bowl 5" Diameter     $29.95

25.473  Deep Pitch Bowl Set 8" Diameter     $99.95
For all-purpose work. Can be tipped to an extreme angle. Complete set consists of pitch, bowl and rubber pads.

25.470  Shallow Pitch Bowl Set      $59.95
Suitable for most work. Can be tipped to an extreme angle. Complete set consists of pitch, bowl and rubber pads.

25.392  Black Pitch 32oz    $

All Prices are in Canadian Dollars
Currency Conversions	Shopping Cart Tips Terms of Sale