Suppliers
to the Jewellery Trade
Chemicals
and Fluxes
Products
on This Page
Associated
Pages
Technical
Jewellery Books
Jewellery
Books - General Jewellery Reference
Jewellery
Books - Metalsmithing
Soldering
& Casting Flux
Boraxin
Liquid Rose Flux
German-made borax-based
flux for hard soldering silver, gold, copper, brass, and bronze. A more
viscous flux. Apply, heat with torch until flux puffs up, and solder when
flux settles.
25676 Boraxin
Liquid Rose Flux 250 ml $24.95
25677 Boraxin
Liquid Rose Flux 500 ml $48.95
25678 Boraxin
Liquid Rose Flux 1000 ml $89.95
Superior
Flux #6
For silver brazing
of ferrous and non ferrous metals (except aluminum). Active up to 1600º
F (870º C). Contains no potassium biflouride. This is a relatively
safe, white, paste flux.
SUP6 Superior
#6 Paste Flux 1 lb $11.95
Battern's
Self-Pickling Hard Soldering Flux
Makes hard soldering
as easy as soft soldering. Use on gold, silver, platinum and other metals
with high melting points. Preserves temper and colour of metal and the
adhesive qualities of this liquid flux hold solder in place.
54402 Battern's
Flux 3 oz. $3.95
54404 Battern's
Flux 8 oz. $5.95
54406 Battern's
Flux 16 oz. $7.95
54408 Battern's
Flux 32 oz. $11.95
54444 Battern's
Flux 128 oz. $29.95
Flo
Kleen Flux
20001 Flo Kleen
Flux 250 ml $6.95
Borax
The traditional
casting and melting flux.
99848 Borax
Powder 425 g $6.95
54252 Borax
Cone 4 oz. $9.95
Boracic
Acid
Also called Boric
Acid. Mixed with alcohol. Item to be soldered is dipped in this solution
and air dryed as a treatment before soldering (with appropriate flux) to
reduce firescale.
99849 Boracic
Acid 325 g $6.50
Dandix
Paste Flux
For use in low temperature
brazing and silver soldering ferrous and non-ferrous metals. Begins to
dissolve oxides at 800º F (427º C) and is fluid-active between
1100º and 1600º F (593º and 871º C). Contains no flouride.
54440 Dandix
Paste Flux 1.5 oz. $8.95
54442 Dandix
Paste Flux 8 oz. $14.95
54444 Dandix
Paste Flux 16 oz. $22.95
Tix
Flux
A non-corrosive
flux, harmless to hands or clothing. Washes off with water, even after
drying. Works with any soft solder.
54460 Tix
Flux 1/2 oz. bottle $4.95
54462 Tix
Anti-Flux 1/2 oz. bottle $4.95
Prevents solder
from flowing into unwanted areas. Brushes on easily.
Kool-Jool®
Protects jewels
from heat while soldering. No need to remove jewels from settings (except
opals). If flame is used for soldering, the jewel will stay cool. Rinses
off in plain water. Colour is flourescent pink.
54468 Kool
Jool 8 oz. Jar $10.95
Vigor®
Heat Shield Protective Paste
Protects components
under direct 5000º F (2760º C) flame. Not necessary to remove
stone before soldering. Prevents oxidization and is odourless and non-toxic.
Good for dozens of applications. Washes off with water. Colour is grey.
54448 Vigor
Heat Shield Paste 1lb. Jar $18.95
Chemicals
For professional
use only. These chemicals are dangerous
and should not be used by schools or novice craftspersons
without direct supervision by a trained professional.
These chemicals
cannot be shipped.
Lacy West reserves
the right to not sell these chemicals to non-professionals.
99844 Acetone
950 ml $19.95
45689 Griffith
Liver of Sulphur 4 oz $8.95
99856 Sulphuric
Acid 2.25 Litres $49.95
99851 Hyrdrochloric
Acid 2.25 Litres $49.95
Nitric Acid 2.25
Litres $49.95
99850 Cupric
Nitrate - Green Patina 100 g $19.95
Methyl Hydrate
- 99% 4 Litres $11.95
Hydrogen Peroxide
35% Solution - 4 Litres $49.95
Urea Powder 1
lb. $9.95
Sodium Cyanide
Powder 1 lb. $29.95
Professional
Chemical Recipes
Always add acid
to water, not water to acid.
These recipes
are provided as reminders for professionals.
ETCH SOFT STEEL
-
296 ml nitric acid
-
30 ml hydrochloric
acid
-
148 ml methanol
(alcohol)
-
1035 ml distilled water
-
ETCH STEEL &
IRON
-
2 parts hydrochloric
acid
-
1 part water
STRIPPING AND BOMBING
Professionals may
obtain a copy of our Lacy West instruction sheet in our showroom.
REMOVE INVESTMENT
-
1 part hydrochloric
acid
-
1 part water
ETCH GOLD ("Aqua
Regia")
-
1 part nitric acid
-
3 parts hydrochloric
acid
ETCH FINE SILVER
& STERLING SILVER
-
1 part nitric acid
-
3 parts water
PATINA FOR SILVER
-
1 pea-sized piece
liver
of sulphur
-
1 cup warm water
BRIGHT DIP FOR ALL
NON-FERROUS METAL
-
5 parts water
-
5 parts sulphuric
acid
-
2-1/2 parts nitric
acid
-
2 parts hyrdrochloric
acid
PICKLE
-
1 part nitric acid
-
20 parts water
or
-
1 part sulphuric
acid
-
10 parts water
IS IT GOLD?
Make a scratch in
an inconspicuous spot with a small file. While wearing rubber gloves, use
a wooden, glass or plastic stick to apply a drop of nitric acid
to this spot. Observe reaction. When done, rinse everything with running
water.
-
No reaction -
It's gold
-
Bright Green - It's
base metal
-
Green in scratch
- Gold layer over base metal
-
Milky in scratch
- It's gold over silver
| Home
| News & Specials
| Products
| Search |
Technical
Support | FAQs
|
| Shopping
Cart | Privacy
& Security | Mail
& Fax Orders | Terms
of Sale |
| Contacts
| Links | WebBoss
|
Top of Page
Copyright @ 2001
Lacy West Supplies Ltd.
www.lacywest.com