Suppliers to the Jewellery Trade

J-2R IV Resistance-Heated Vacuum Casting Machine

All Prices are in Canadian Dollars
Currency Conversions	Shopping Cart Tips Terms of Sale

For a fraction of the cost of any comparable machine, the Neutec J-2R IV gives you superior castings and greater production capacity. This exceptional machine combines advanced technology with practical design to give you the casting capability you need today and well into the future.

The J-2R IV employs an oxygen-free atmosphere for the metal during melting and pouring to help eliminate oxidation. The large-volume graphite crucible also removes oxygen that may previously have been dissolved in the metal. This means fewer defects and lower reject rates.

Cast at the optimum temperature for any design without overheating the metal. The J-2R IV measures the metal temperature in the center of the metal pool, giving you accurate casting temperatures. The crucible is a bottom-pour design, so there is very little drop in metal temperature from crucible to flask.

After initial warm-up, the casting cycle time of the J-2R IV is a fast 6 to 8 minutes, depending on the size of the load. The large-volume crucible holds 184 cc of metal (902 g 14KY or 722 g SS). Accommodates flask sizes from 2.5" to 4" in diameter and up to 9" high.

Simple to install and operate in only three square feet of bench space, the J-2R IV requires only that you set the temperature controller for the desired casting temperature, add the casting grain to the crucible, insert the flask and (at set temperature) push the casting lever.

The J-2R provides the small shop with professional quality casting capability at an affordable price. Cast one-of-a-kinds or short runs economically with this resistance-heated machine. The Neutec J-2R IV is perfect for jewellery designers and small manufacturing shops. Its features provide the control you need to produce quality castings time after time. The design and heavy-duty construction, using best-available components, offers outstanding reliability. Made in the USA.

J-2R IV Specifications

Crucible Capacity:	722 g sterling or 901 g 14K gold
Max. Flask Capacity:	4" x 9" (102 x 229 mm) perforated
Typical Cycle Times:	6 to 8 minutes after initial warm-up
Max. Temperature:	2200 °F (1024 °C)
Overall Dimensions:	32"H x 18"W x 18"D (81 x 46 x 46 cm)
Weight:	119 lbs. (54 kg)
Shipping Weight:	143 lbs. (65 kg)
Power Requirements:	220 VAC, 15 amps, single-phase

Purchase Options

• J-2R IV Vacuum Casting Machine (machine only)
• Neutec J-2R IV Start-Up Machine Kit (does not include J-2R IV)

• Leasing is an effective way to finance equipment. In many cases, leasing allows you to deduct leasing costs as an operating expense. You pay for the equipment with pre-tax earnings rather than after-tax profits.
• Leasing costs vary by term and start at about $450 CAD per month for the The J-2R IV Vacuum Casting Machine and Neutec Start-up Machine Kit.
• Contact us for further information about Leasing Options available to you.

• Easy installation and simple operation.
• Fast cycle times - 6 to 8 minutes.
• Oxygen-free atmosphere to help provide oxide-free castings.
• Long-life coil design.
• Accurate temperature control for repeatable casting.
• Advanced technology graphite crucible system that helps remove oxides from the metal without the risk of carbon inclusions.
• Low-cost consumables.
• CE certification.
• One-year manufacturer's warranty on machine - parts and labour.
• Includes adapter ring for 4" perforated flasks and an R-46 grade graphite one-piece sealing rod.
• Ability to cast perforated flasks up to 4" x 9" (102 x 229 mm).
• Interlocking consumables that protect the coil from metal spills.

710-040/CE  Neutec J-2R IV Vacuum Casting Machine - European   $10,080.00

ORDER QUANTITY

560-130  Neutec J-2R Introduction Video - 5 minutes   $29.95

ORDER QUANTITY

This start-up kit includes the consumables and accessories needed to cast with the J-2R machine. It includes the J-2R video, which describes the setup and operation of the machine in detail. The kit does not include the J-2R IV machine, nitrogen tank or other materials required for casting. Choose between the 110 VAC and 220 VAC vacuum pumps to match the voltage in your locale.

You can purchase this standard kit or contact us to create your own kit to fit your specific needs.

The Neutec J-2R IV Start-up Kit includes:

• 710-100  Nitrogen Regulator, 0-50 psi, two stage, one each.
• 700-350 or 700-350/220  5 cfm /142 lpm Vacuum Pump, one each.
• 710-192  Graphite Crucibles, 8 mm hole, 5 each.
• 710-193  Graphite Crucibles, 9.5 mm hole, 5 each.
• 710-373  One-Piece Sealing Rods, R-46 Graphite, one package of 6.
• 710-340  Crucible Bottom Gaskets, one package of 6.
• 710-364  Type K Thermocouple, Series IV, one each.
• 710-090  Ceramic Crucible Stand, one package of 3.
• 710-191  Filling Cone for J-2R IV, one package of 2.
• 710-034  Graphite Stirring Rod, one package of 10.
• 710-562  O-Rings for 4" Flask, one package of 6.
• 710-217  O-Ring Lubricant, one tube.
• 710-407  Woven Gaskets for 4" Flask, one package of 6.
• 702-189/N  Perforated Flask, 4" x 6", Stainless Steel, one each.
• 702-194/N  Perforated Flask, 4" x 9", Stainless Steel, two each.
• 710-964/100  Shrink Bands for 4" Flask, one package of 100.
• 710-911  NeuSprue 4" Base Assembly, three each.
• 704-116  Teflon Metal Dispenser, one each.
• 710-225  Flask Removal Tongs for 4" Flask, one each.
• 560-059  Instructional Video, VHS, 24 minutes, one each.
• 710-898/30  5" NeuSprue for 6" Flask, one package of 30.
• 710-901/30  8" NeuSprue for 9" Flask, one package of 30.

710-239/220  Neutec J-2R IV Machine Start-Up Kit, 220 VAC (J-2R not included)   $2680.00

ORDER QUANTITY

All Prices are in Canadian Dollars
Currency Conversions	Shopping Cart Tips Terms of Sale